APC Smart-UPS C 3000VA Rack mount LCD 230 V

These APC Smart-UPS are designed for small and medium-sized enterprises, ensuring smooth operation and business continuity. This 3kVA linear interactive UPS in a 2U form factor provides strictly sine wave power to support mission-critical electronics during power failures. The UPS is supplied with IEC 320 C20 inputs, 8 IEC 320 C13 and 1 IEC 320 C19 sockets and 2 IEC connection cables. Smart-UPS C features an intuitive graphical LCD display. This UPS is powered by a lead-acid battery and comes with a 2-year warranty. This Line Interactive UPS operates in ECO mode to achieve high operating efficiency. The SMC is powered by a lead-acid battery and is covered by a 2-year UPS warranty. The UPS provides protection against overvoltage, lightning surges, power outages, power surges and power surges. This battery is compatible with a dedicated user-replaceable battery and an APC replacement battery cartridge helps restore UPS performance to original specifications.

Main Input voltage
230 B

Main Output voltage
230 V

Rated power [Tue]
2100 W

Rated power
3000 VA

Product Type
Uninterruptible power supply (UPS)

Input Connection Type
IEC 320 C20

output connection type
8 IEC 320 C13
2 IEC Jumpers
1 IEC 320 C19

Number of Units
2U

Number of cables
1

Battery Type
Lead-acid battery

The possibility of increasing the autonomy time
is 0

Pre-installed batteries
0

Free battery compartments
0

Typical recharge time
3 h

number of RBC™ cartridges
1

battery life
3…5 year(s)

Spare battery
APCRBC151

Charger power (W)
163 W rated

Harmonic distortion
Less than 5 %

The maximum specified power (VA)
is 3000 VA

Maximum set power (W)
2100 W

Switching time
Typical time is 8 ms: maximum is 10 ms

Type of UPS
Linearly interactive

Wave type
Sinusoidal signal

Output frequency
50 Hz synchronized with the power grid

Type of execution	Rackmount
Main characteristics
Main Input Voltage	230 V
Main Output Voltage	230 V
Rated power in W	2.1 kW
Rated power in VA	3 kVA
Product or component type	Uninterruptible power supply (UPS)
Input Connection Type	IEC 320 C20
Output Connection Type	8 IEC 320 C13, 2 IEC Jumpers, 1 IEC 320 C19
Number of cables	1
Battery type	Lead-acid battery
Provided equipment	Documentation CD, Installation guide, Rack mounting brackets, USB cable
Batteries & Runtime
Number of battery filled slots	0
Number of battery free slots	0
Battery recharge time	3 h
Battery charger power	163 W nominal
Battery life	3...5 year(s)
General characteristics
Number of power module free slots	0
Number of power module filled slots	0
Redundant	No
Physical characteristics
Height	8.90 cm
Width	48.00 cm
Depth	67.00 cm
net. Weight	41.00 kg
Mounting location	Front
Mounting preference	Lower
Mounting mode	Rack-mounted
USB compatible	Yes
Input
Network frequency	50/60 Hz +/- 3 Hz auto-sensing
Input voltage limits	180...287 V
Output
Maximum configurable power in VA	3000 VA
Maximum configurable power in W	2100 W
Output frequency	50 Hz synchronized with the power grid
UPS type	Line-Interactive
Wave type	Sine wave
Transfer time	Typical time: 8 ms; maximum: 10 ms
Conformance
Product certifications	C-Tick, CE, EAC, GOST, IRAM, SABS, VDE
Standards	EN/IEC 62040-1:2019/A11:2021, EN/IEC 62040-2:2006/AC:2006, EN/IEC 62040-2:2018
Environmental
Ambient air temperature for operation	0..40 °C
Relative humidity	0…95 %
Operating altitude	0...10000 ft
Ambient air temperature for storage	-15…45 °C
Storage Relative Humidity	0…95 %
Storage altitude	0.0000000000…15240.0000000000 m
Acoustic level	42 dBA
Communications & Managemen
Alarm	Alarm when on battery : distinctive low battery alarm : configurable delays
Сontrol panel	Multifunction LCD status and control console
Surge Protection and Filtering
Surge energy rate	300 J
Noise suppression	Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449